Drop

The gdk.drop.Drop object represents the target of an ongoing DND operation.

Possible drop sites get informed about the status of the ongoing drag operation with events of type gdk.types.EventType.DragEnter, gdk.types.EventType.DragLeave, gdk.types.EventType.DragMotion and gdk.types.EventType.DropStart. The gdk.drop.Drop object can be obtained from these gdk.event.Event types using gdk.dndevent.DNDEvent.getDrop.

The actual data transfer is initiated from the target side via an async read, using one of the gdk.drop.Drop methods for this purpose: gdk.drop.Drop.readAsync or gdk.drop.Drop.readValueAsync.

GTK provides a higher level abstraction based on top of these functions, and so they are not normally needed in GTK applications. See the "Drag and Drop" section of the GTK documentation for more information.

class Drop : ObjectG {

void finish(gdk.types.DragAction action);

gdk.types.DragAction getActions();

gdk.device.Device getDevice();

gdk.display.Display getDisplay();

gdk.drag.Drag getDrag();

gdk.content_formats.ContentFormats getFormats();

gdk.surface.Surface getSurface();

void readAsync(string[] mimeTypes, int ioPriority, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback);

gio.input_stream.InputStream readFinish(gio.async_result.AsyncResult result, string outMimeType);

void readValueAsync(gobject.types.GType type, int ioPriority, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback);

gobject.value.Value readValueFinish(gio.async_result.AsyncResult result);

void status(gdk.types.DragAction actions, gdk.types.DragAction preferred);

}

Members

Functions

finish void finish(gdk.types.DragAction action): Ends the drag operation after a drop.
getActions gdk.types.DragAction getActions(): Returns the possible actions for this gdk.drop.Drop.
getDevice gdk.device.Device getDevice(): Returns the gdk.device.Device performing the drop.
getDisplay gdk.display.Display getDisplay(): Gets the gdk.display.Display that self was created for.
getDrag gdk.drag.Drag getDrag(): If this is an in-app drag-and-drop operation, returns the gdk.drag.Drag that corresponds to this drop.
getFormats gdk.content_formats.ContentFormats getFormats(): Returns the gdk.content_formats.ContentFormats that the drop offers the data to be read in.
getSurface gdk.surface.Surface getSurface(): Returns the gdk.surface.Surface performing the drop.
readAsync void readAsync(string[] mimeTypes, int ioPriority, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback): Asynchronously read the dropped data from a gdk.drop.Drop in a format that complies with one of the mime types.
readFinish gio.input_stream.InputStream readFinish(gio.async_result.AsyncResult result, string outMimeType): Finishes an async drop read operation.
readValueAsync void readValueAsync(gobject.types.GType type, int ioPriority, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback): Asynchronously request the drag operation's contents converted to the given type.
readValueFinish gobject.value.Value readValueFinish(gio.async_result.AsyncResult result): Finishes an async drop read.
status void status(gdk.types.DragAction actions, gdk.types.DragAction preferred): Selects all actions that are potentially supported by the destination.

Inherited Members

From ObjectG

setGObject void setGObject(void* cObj, Flag!"Take" take): Set the GObject of a D ObjectG wrapper.
cPtr void* cPtr(Flag!"Dup" dup): Get a pointer to the underlying C object.
ref_ void* ref_(void* gObj): Calls g_object_ref() on a GObject.
unref unref(void* gObj): Calls g_object_unref() on a GObject.
getType GType getType(): Get the GType of an object.
gType GType gType [@property getter]: GObject GType property.
self ObjectG self(): Convenience method to return this cast to a type. For use in D with statements.
getDObject T getDObject(void* cptr, Flag!"Take" take): Template to get the D object from a C GObject and cast it to the given D object type.
connectSignalClosure ulong connectSignalClosure(string signalDetail, DClosure closure, Flag!"After" after): Connect a D closure to an object signal.
setProperty void setProperty(string propertyName, T val): Template for setting a GObject property.
getProperty T getProperty(string propertyName): Template for getting a GObject property.
compatControl size_t compatControl(size_t what, void* data)
bindProperty gobject.binding.Binding bindProperty(string sourceProperty, gobject.object.ObjectG target, string targetProperty, gobject.types.BindingFlags flags): Creates a binding between source_property on source and target_property on target.
bindPropertyFull gobject.binding.Binding bindPropertyFull(string sourceProperty, gobject.object.ObjectG target, string targetProperty, gobject.types.BindingFlags flags, gobject.closure.Closure transformTo, gobject.closure.Closure transformFrom): Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.
forceFloating void forceFloating(): This function is intended for #GObject implementations to re-enforce a floating[floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling gobject.object.ObjectG.refSink.
freezeNotify void freezeNotify(): Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.
getData void* getData(string key): Gets a named field from the objects table of associations (see gobject.object.ObjectG.setData).
getProperty void getProperty(string propertyName, gobject.value.Value value): Gets a property of an object.
getQdata void* getQdata(glib.types.Quark quark): This function gets back user data pointers stored via gobject.object.ObjectG.setQdata.
getv void getv(string[] names, gobject.value.Value[] values): Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
isFloating bool isFloating(): Checks whether object has a floating[floating-ref] reference.
notify void notify(string propertyName): Emits a "notify" signal for the property property_name on object.
notifyByPspec void notifyByPspec(gobject.param_spec.ParamSpec pspec): Emits a "notify" signal for the property specified by pspec on object.
refSink gobject.object.ObjectG refSink(): Increase the reference count of object, and possibly remove the floating[floating-ref] reference, if object has a floating reference.
runDispose void runDispose(): Releases all references to other objects. This can be used to break reference cycles.
setData void setData(string key, void* data): Each object carries around a table of associations from strings to pointers. This function lets you set an association.
setProperty void setProperty(string propertyName, gobject.value.Value value): Sets a property on an object.
stealData void* stealData(string key): Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
stealQdata void* stealQdata(glib.types.Quark quark): This function gets back user data pointers stored via gobject.object.ObjectG.setQdata and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:
thawNotify void thawNotify(): Reverts the effect of a previous call to gobject.object.ObjectG.freezeNotify. The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.
watchClosure void watchClosure(gobject.closure.Closure closure): This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling gobject.closure.Closure.invalidate on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, gobject.object.ObjectG.ref_ and gobject.object.ObjectG.unref are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
connectNotify ulong connectNotify(string detail, T callback, Flag!"After" after): Connect to Notify signal.

gdk drop classes

Drop