PrintDialog

A gtk.print_dialog.PrintDialog object collects the arguments that are needed to present a print dialog to the user, such as a title for the dialog and whether it should be modal.

The dialog is shown with the gtk.print_dialog.PrintDialog.setup function. The actual printing can be done with gtk.print_dialog.PrintDialog.print or gtk.print_dialog.PrintDialog.printFile. These APIs follows the GIO async pattern, and the results can be obtained by calling the corresponding finish methods.

class PrintDialog : ObjectG {

this();

string getAcceptLabel();

bool getModal();

gtk.page_setup.PageSetup getPageSetup();

gtk.print_settings.PrintSettings getPrintSettings();

string getTitle();

void print(gtk.window.Window parent, gtk.print_setup.PrintSetup setup, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback);

void printFile(gtk.window.Window parent, gtk.print_setup.PrintSetup setup, gio.file.File file, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback);

bool printFileFinish(gio.async_result.AsyncResult result);

gio.output_stream.OutputStream printFinish(gio.async_result.AsyncResult result);

void setAcceptLabel(string acceptLabel);

void setModal(bool modal);

void setPageSetup(gtk.page_setup.PageSetup pageSetup);

void setPrintSettings(gtk.print_settings.PrintSettings printSettings);

void setTitle(string title);

void setup(gtk.window.Window parent, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback);

gtk.print_setup.PrintSetup setupFinish(gio.async_result.AsyncResult result);

}

Constructors

this this(): Creates a new gtk.print_dialog.PrintDialog object.

Members

Functions

getAcceptLabel string getAcceptLabel(): Returns the label that will be shown on the accept button of the print dialog.
getModal bool getModal(): Returns whether the print dialog blocks interaction with the parent window while it is presented.
getPageSetup gtk.page_setup.PageSetup getPageSetup(): Returns the page setup.
getPrintSettings gtk.print_settings.PrintSettings getPrintSettings(): Returns the print settings for the print dialog.
getTitle string getTitle(): Returns the title that will be shown on the print dialog.
print void print(gtk.window.Window parent, gtk.print_setup.PrintSetup setup, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback): This function prints content from a stream.
printFile void printFile(gtk.window.Window parent, gtk.print_setup.PrintSetup setup, gio.file.File file, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback): This function prints a file.
printFileFinish bool printFileFinish(gio.async_result.AsyncResult result): Finishes the gtk.print_dialog.PrintDialog.printFile call and returns the results.
printFinish gio.output_stream.OutputStream printFinish(gio.async_result.AsyncResult result): Finishes the gtk.print_dialog.PrintDialog.print call and returns the results.
setAcceptLabel void setAcceptLabel(string acceptLabel): Sets the label that will be shown on the accept button of the print dialog shown for gtk.print_dialog.PrintDialog.setup.
setModal void setModal(bool modal): Sets whether the print dialog blocks interaction with the parent window while it is presented.
setPageSetup void setPageSetup(gtk.page_setup.PageSetup pageSetup): Set the page setup for the print dialog.
setPrintSettings void setPrintSettings(gtk.print_settings.PrintSettings printSettings): Sets the print settings for the print dialog.
setTitle void setTitle(string title): Sets the title that will be shown on the print dialog.
setup void setup(gtk.window.Window parent, gio.cancellable.Cancellable cancellable, gio.types.AsyncReadyCallback callback): This function presents a print dialog to let the user select a printer, and set up print settings and page setup.
setupFinish gtk.print_setup.PrintSetup setupFinish(gio.async_result.AsyncResult result): Finishes the gtk.print_dialog.PrintDialog.setup call.

Inherited Members

From ObjectG

setGObject void setGObject(void* cObj, Flag!"Take" take): Set the GObject of a D ObjectG wrapper.
cPtr void* cPtr(Flag!"Dup" dup): Get a pointer to the underlying C object.
ref_ void* ref_(void* gObj): Calls g_object_ref() on a GObject.
unref unref(void* gObj): Calls g_object_unref() on a GObject.
getType GType getType(): Get the GType of an object.
gType GType gType [@property getter]: GObject GType property.
self ObjectG self(): Convenience method to return this cast to a type. For use in D with statements.
getDObject T getDObject(void* cptr, Flag!"Take" take): Template to get the D object from a C GObject and cast it to the given D object type.
connectSignalClosure ulong connectSignalClosure(string signalDetail, DClosure closure, Flag!"After" after): Connect a D closure to an object signal.
setProperty void setProperty(string propertyName, T val): Template for setting a GObject property.
getProperty T getProperty(string propertyName): Template for getting a GObject property.
compatControl size_t compatControl(size_t what, void* data)
bindProperty gobject.binding.Binding bindProperty(string sourceProperty, gobject.object.ObjectG target, string targetProperty, gobject.types.BindingFlags flags): Creates a binding between source_property on source and target_property on target.
bindPropertyFull gobject.binding.Binding bindPropertyFull(string sourceProperty, gobject.object.ObjectG target, string targetProperty, gobject.types.BindingFlags flags, gobject.closure.Closure transformTo, gobject.closure.Closure transformFrom): Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.
forceFloating void forceFloating(): This function is intended for #GObject implementations to re-enforce a floating[floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling gobject.object.ObjectG.refSink.
freezeNotify void freezeNotify(): Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.
getData void* getData(string key): Gets a named field from the objects table of associations (see gobject.object.ObjectG.setData).
getProperty void getProperty(string propertyName, gobject.value.Value value): Gets a property of an object.
getQdata void* getQdata(glib.types.Quark quark): This function gets back user data pointers stored via gobject.object.ObjectG.setQdata.
getv void getv(string[] names, gobject.value.Value[] values): Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.
isFloating bool isFloating(): Checks whether object has a floating[floating-ref] reference.
notify void notify(string propertyName): Emits a "notify" signal for the property property_name on object.
notifyByPspec void notifyByPspec(gobject.param_spec.ParamSpec pspec): Emits a "notify" signal for the property specified by pspec on object.
refSink gobject.object.ObjectG refSink(): Increase the reference count of object, and possibly remove the floating[floating-ref] reference, if object has a floating reference.
runDispose void runDispose(): Releases all references to other objects. This can be used to break reference cycles.
setData void setData(string key, void* data): Each object carries around a table of associations from strings to pointers. This function lets you set an association.
setProperty void setProperty(string propertyName, gobject.value.Value value): Sets a property on an object.
stealData void* stealData(string key): Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
stealQdata void* stealQdata(glib.types.Quark quark): This function gets back user data pointers stored via gobject.object.ObjectG.setQdata and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:
thawNotify void thawNotify(): Reverts the effect of a previous call to gobject.object.ObjectG.freezeNotify. The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.
watchClosure void watchClosure(gobject.closure.Closure closure): This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling gobject.closure.Closure.invalidate on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, gobject.object.ObjectG.ref_ and gobject.object.ObjectG.unref are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.
connectNotify ulong connectNotify(string detail, T callback, Flag!"After" after): Connect to Notify signal.

gtk print_dialog classes

PrintDialog