GstPtpClock implements a PTP (IEEE1588:2008) ordinary clock in slave-only
mode, that allows a GStreamer pipeline to synchronize to a PTP network
clock in some specific domain.
The PTP subsystem can be initialized with gstnet.global.ptpInit, which then starts
a helper process to do the actual communication via the PTP ports. This is
required as PTP listens on ports < 1024 and thus requires special
privileges. Once this helper process is started, the main process will
synchronize to all PTP domains that are detected on the selected
interfaces.
gstnet.ptp_clock.PtpClock.new_ then allows to create a GstClock that provides the PTP
time from a master clock inside a specific PTP domain. This clock will only
return valid timestamps once the timestamps in the PTP domain are known. To
check this, you can use gst.clock.Clock.waitForSync, the GstClock::synced
signal and gst.clock.Clock.isSynced.
To gather statistics about the PTP clock synchronization,
gstnet.global.ptpStatisticsCallbackAdd can be used. This gives the application
the possibility to collect all kinds of statistics from the clock
synchronization.
GstPtpClock implements a PTP (IEEE1588:2008) ordinary clock in slave-only mode, that allows a GStreamer pipeline to synchronize to a PTP network clock in some specific domain.
The PTP subsystem can be initialized with gstnet.global.ptpInit, which then starts a helper process to do the actual communication via the PTP ports. This is required as PTP listens on ports < 1024 and thus requires special privileges. Once this helper process is started, the main process will synchronize to all PTP domains that are detected on the selected interfaces.
gstnet.ptp_clock.PtpClock.new_ then allows to create a GstClock that provides the PTP time from a master clock inside a specific PTP domain. This clock will only return valid timestamps once the timestamps in the PTP domain are known. To check this, you can use gst.clock.Clock.waitForSync, the GstClock::synced signal and gst.clock.Clock.isSynced.
To gather statistics about the PTP clock synchronization, gstnet.global.ptpStatisticsCallbackAdd can be used. This gives the application the possibility to collect all kinds of statistics from the clock synchronization.